Remote Electronic Ignition – Flame Control

This flame control system uses our revolutionary remote electronic ignition module with hot wire ignition & thermocouple sensing for reliable outdoor ignition and minimal wind dropout. Safely turns off gas if no flame presence, and will automatically restart. The flame control system is housed in a stainless steel (#304) water resistant control box and is built for Natural Gas or LP, 120v or 24vac, with a 3ft or a 6ft pilot assembly. Pilot assembly is required to be fastened to pan or main burner for safe ignition.

Assembled Kits Only

(built as Nat. Gas, LP upon request)

MVK-HW90-3, MVK-HW90-6
90,000 Btu, 120vac Powered (24vac upon request)
Hot Wire Ignition flame control system mounted in stainless steel valve box with 3’ or 6’ length pilot assembly.

MVK-HW150-3, MVK-HW150-6
150,000 Btu, 120vac Powered (24vac upon request)
Hot Wire Ignition flame control system mounted in stainless steel valve box with 3’ or 6’ length pilot assembly

MVK-HW300-3,MVK-HW300-6
300,000 Btu, 120vac Powered (24vac upon request)
Hot Wire Ignition flame control system mounted in stainless steel valve box with 3’ or 6’ length pilot assembly

MVK-HW400-3, MVK-HW400-6
400,000 Btu, 120vac Powered (24vac upon request)
Hot Wire Ignition flame control system mounted in stainless steel valve box with 3’ or 6’ length pilot assembly.